75Ni8 1.5634 Quenched Tempered Spring Steel Strip

BS EN 10132-4 75Ni8 1.5634 Quenched Tempered Spring steel strip
 
 

75Ni8 1.5634 Quenched Tempered Strip Dimensions and tolerances
Thickness: 1 to 8 mm; Tolerances: +/- 0.008 to 0.11 mm
Width: 10 to 400 mm; Tolerances: +/- 0.15 to 0.60
 
Our Advantage
1. Precise thickness, uniform hardness. Bright surface, smooth edge.
2. High flatness of board surface, high performance after multiple bending.
3. No cracking after stamping, and the quality is stable. And we provide Self-Inspection Reports and Raw-Material Test Certificates.
4. Professional anti-rust protective packaging. On time delivery, competitive price.
5. Large stock available, no MOQ requirement.
75Ni8 1.5634 Quenched Tempered Strip Chemical composition

 
75Ni8 1.5634 Quenched Tempered Strip Mechanical properties

 
75Ni8 1.5634 Quenched Tempered Strip Mandatory information
The following information shall be supplied by the purchaser at the time of enquiry and order to enable the supplier to comply with the requirements of this European Standard:
a) the quantity to be delivered;
b) the designation of the product form (cold rolled narrow strip);
c) the number of the dimensional standard (EN 10140);
d) the dimensions and tolerances on dimensions and shape and, if applicable, letters
denoting relevant special tolerances;
e)the number of this European Standard including the number of the relevant part;
f) steel name or steel number
g) the delivery condition
h) if required, the type of inspection document in accordance with EN 10204.
 
75Ni8 1.5634 Quenched Tempered Strip Delivery condition
Cold rolled narrow steel strip covered by EN10132-4 shall be supplied in one of the following delivery conditions:
-annealed or annealed and skin passed(+A or +LC);
-cold rolled(+CR);
-quenched and tempered(+QT).
NOTE The delivery condition-annealed to achieve spheroidized carbides(+AC)-may be agreed. In such cases, limits on spheroidization and mechanical properties may also be agreed at the time of enquiry and order.
 
Carbon steel 75Ni8 1.5634 with 2% nickel
Used especially for the manufacture of band saw blades, 15N20 / 75Ni8 / 1.5634 steel is a carbon steel with properties similar to 1075 steel, but containing a significant proportion of nickel.
 
Highly valued in the manufacture of Damascus Steel:
It is either used alone to make a blade, or alloyed with another steel 1075, 1095, O2 etc, for the making of a Damascus of a good contrast after etching. Nickel provides a high contrasting power (shiny parts), that is why 15N20 / 75Ni8 / 1.5634 steel is perfect for Damascus forging.
 
75Ni8 1.5634 carbon steel for the manufacture of knives and swords
It is easy to sharpen and its toughness remains one of its main advantages. Nickel steel 15N20 / 75Ni8 / 1.5634 can be used for the manufacture of knives, but also for the manufacture of swords.
 
75Ni8 1.5634 Quenched Tempered Strip Decarburization
For silicon alloyed steels, decarburization shall not exceed 3% of the material thickness per side,for non silicon alloyed steels, decarburization shall not exceed 2% of the material thickness per side when measure data distance of 5mm from the stripe edge
 
Hardened and Tempered Steel Strip (also known as hardened and tempered High carbon steel strip or, hardened and tempered carbon spring steel strip) is the basic raw material from which many different components are made, substantially being spring-type applications ranging from clutch plate segments to washers, retractor springs and even to tree springs in riding saddles and traditional clock springs. These strip products are a specialty of the Company and considerable plant development has taken place in recent years to facilitate a very wide range of dimensions, mechanical properties and coil weights. Hardened and Tempered Steel Strip gauges of between 0.10mm and 2.00mm can be processed and, depending on the appropriate combination to suit the process equipment, strip widths of between 4.76mm to 240mm are produced. The facilities also allow up to 2000kg coils to be produced though most are well below this, being governed by a very approximate relationship of 100kg per 25mm of width.
 
Carbon steel 15N20 with 2% nickel, ideal for the manufacture of Damascus steel
Used especially for the manufacture of band saw blades, 15N20 / 75Ni8 / 1.5634 steel is a carbon steel with properties similar to 1075 steel, but containing a significant proportion of nickel.
Highly valued in the manufacture of Damascus Steel:
It is either used alone to make a blade, or alloyed with another steel 1075, 1095, O2 etc, for the making of a Damascus of a good contrast after etching. Nickel provides a high contrasting power (shiny parts), that is why 15N20 / 75Ni8 / 1.5634 steel is perfect for Damascus forging.
15N20 carbon steel for the manufacture of knives and swords
It is easy to sharpen and its toughness remains one of its main advantages. Nickel steel 15N20 / 75Ni8 / 1.5634 can be used for the manufacture of knives, but also for the manufacture of swords.
Perhaps you know this steel by another name:
The 15N20 corresponds approximately to the following standards: AFNOR 75Ni8 - AISI L6 - Wnr 1.5634
 
The surface finish of Hardened and Tempered Steel Strip products is not too critical in general engineering applications where the normal blue-black (also known as blue-grey) oxidized finish from the heat treatment is satisfactory. By control of the atmospheres in the furnaces non-oxidised surfaces can also be produced, on a selected basis, and alternatively, steels can be satin or bright polished were needed, these finishes being as much for cosmetic reasons as for engineering purposes.
 
75Ni8 1.5634 Quenched Tempered Strip Surface finish
The surface finish of cold rolled narrow steel strip shall be bright as produced by rolling and annealing in a controlled atmosphere.
The surface finishes of quenched and tempered cold rolled strip are as follows:
1 grey/blue oxide finish:unpolished;
2 brigth tempered:unpolished
3 polished: obtained by fine grinding, abrasive brushing or other processes;
4 polished and coloured:blue or yellow colour obtained by oxidization by heat
treatment.
 
75Ni8 1.5634 Quenched Tempered Strip Inspection and testing
verification of the dimensions
visual examination of the surface quality
Chemical analysis
Extent of testing
Tensile and bending tests
Tolerances on shape